Drayton (ACL) ZA5/679-2 Zone Valve
£52.78
Ex VAT: £43.98
ZA5/679-2 (Zone Valve) 22mm 2-port
Drayton motorised valves now feature removable actuators which simplify installation and future servicing.
No tools are required to fit the actuator to the body as it simply clicks into place.
To remove just press the release button and lift the actuator from the body.
Replaces (Same wiring dimensions and thread for a direct swap) for:
ACL Drayton Lifestyle 679H308-30L1
Drayton ZVA22.
British Gas MV22Z
Barlo 2PV-1 2PV-2
Drayton part number 27100
Ask a Question about Drayton (ACL) ZA5/679-2 Zone Valve
-
Hi
Yes it will. Both valve and actuator must be swapped with the ones included.
-
The wire colours are the same. Just isolate the two extra wires.
-
If you are wanting to just change the actuator, then you will need the DVA2/5. If you are draining and replacing the whole valve, then this ZA5/679-2 will be suitable. The wiring is the same.
-
Hi. Yes they are.
-
It is controlled by 230v. If you are controlling just one radiator, then a thermal actuator, with the appropriate body, is cheaper, more compact and quieter than a zone valve.
-
Yes the length is the same.
-
The old Lifestyle valve was a fixed head type, so you need to replace the whole valve.
-
Yes it has.
-
Yes it is the ZA6/779-2. Please see the link below. http://www.heatingcontrolsonline.co.uk/acl-drayton-invensys-za67792-28mm-zone-valve-p-184.html
-
You receive both valve and actuator for the price.
-
Yes it comes with the valve body. Yes it replaces the 679H308-30L1.
-
No you will need to change the whole valve.
-
It is normally closed. It consumes a small amount of power when open.
-
No you will need to swap the whole valve. However, you can re-use the existing nuts.
Showing 1 to 14 of 14 (1 pages)