Drayton (ACL) Lifestyle LP722 7day Programmer (Mk4)
The top of the range Lifestyle LP722 allows independent programming of each channel every day of the week. Where occupation varies controlling the heating to suit can give considerable savings in energy costs. Holiday mode allows temporary shut down for chosen periods. 'Programme test' gives a systematic check on all settings.
Features:
* New Boost Feature!
* Complete with new backplate
* Now even easier to use
* Automatic summer/winter timechange
* Memory saver - programme and clock never need resetting in the event of loss of power
* Easy to read backlit screen
* New contemporary design
* Pre-set clock
* On/once/timed/off switching options
* 3 timing periods per day
* Programme advance buttons
* All programmers suitable for fully pumped or gravity heating systems
* Dimensions: 93x148x31mm HxWxD
* Part L Compliant (Part J in Scotland)
* Proven reliability
Replaces (same backplate and wiring for easy changeover):
ACL Drayton Lifestyle LP112, LP241, LP522, LS241, LS522, LS722, SM2
Tempus 7 (Seven) Mk2
MiTime MT721R, MT721R1A0900
British Gas UP1, UP2, EMP2
Scottish Gas UP1, UP2, EMP2
Barlo EPR1
Replaces (same wiring but backpate change may be needed):
Drayton Tempus 3 (Three), Tempus 4 (Four), Tempus 6 (Six), Drayton Tempus 7 Mk1
Alternate products with same backplate & wiring:
ACL Drayton (Invensys) Lifestyle LP241 - 24 Hour version of LP522
ACL Drayton (Invensys) Lifestyle LP522 - 5/2 Day version of LP722
Ask a Question about Drayton (ACL) Lifestyle LP722 7day Programmer (Mk4)
-
It will work with your existing room thermostat.
-
Hi. I'm afraid not.
-
You will need to change the backplate, but the connections are exactly the same.
-
No. You will need a separate frost thermostat.
-
Yes, the backlight is permanent.
-
Yes, it would be a easy replacement and will clip onto the old backplate with no wiring changes needed.
-
Yes it will.
-
This would be a suitable replacement.
-
Turn the room thermostat right down. If the fault still occurs, then the problem will be in the motorised valve.
-
For unwanted periods, just set the on and off times to the same time. The programmer will ignore them.