Image is for illustration only and should not be relied upon Danfoss Randall RA-G Single Pipe TRV Body
Danfoss Randall RA-G Single Pipe TRV Body

Danfoss Randall RA-G Single Pipe TRV Body

0 reviews

Express delivery Available Until 4pm
UK Mainland Only,
3pm cut-off for Highlands and Islands
1pm for Europe

Image Product Stock Price Add to Cart
1/2" Straight
1/2" Straight
HCO Code: 03B11
  In Stock £41.99 Ex VAT: £34.99
 
1/2" Vertical Angled
1/2" Vertical Angled
HCO Code: 08B11
  In Stock £41.99 Ex VAT: £34.99
 

For use in conventional 1-pipe systems, where circulation through the radiator relies on gravity. RA-G valves have capacities optimised for this type of system which require high flow rates at low pressure drops to function correctly.

For use with RA-Click Sensor


Danfoss Part Numbers:
013G167600 - Vertical Angle
013G167500 - Straight

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • Single pipe TRVs have a higher flow rate and less resistance then two pipe TRVs.  It does sound like you may have two pipe TRVs installed.

  • Standard two pipe valves do not have enough flow for a one pipe system.
  • Yes, it sounds ideal for your circumstance.

  • Hi.  We don't stock them, but can order them in.  If you email sales@heatingcontrolsonline.co.uk with how many you need, and if you need angled or straight, we will give you a quote.
  • Yes they would.

  • They are high flow, but do have a low maximum differential pressure as they are not designed for direct pumping through.
  • Hi. It is 1/2 inch.
  • I would recommend fitting single pipe valves as greater flow is still needed.
  • As long as they are 1/2", then these would be suitable.
  • Yes, you will need RA2910 sensors to go with them. We stock Herz single pipe lockshields. HCO code 16B98. We don't stock any other single pipe valves. When you have made a decision, email sales@heatingcontrolsonline.co.uk and we will look at costs for you.
Showing 1 to 10 of 10 (1 pages)
Expand All
  • Single pipe TRVs have a higher flow rate and less resistance then two pipe TRVs.  It does sound like you may have two pipe TRVs installed.

  • Standard two pipe valves do not have enough flow for a one pipe system.
  • Yes, it sounds ideal for your circumstance.

  • Hi.  We don't stock them, but can order them in.  If you email sales@heatingcontrolsonline.co.uk with how many you need, and if you need angled or straight, we will give you a quote.
  • Yes they would.

  • They are high flow, but do have a low maximum differential pressure as they are not designed for direct pumping through.
  • Hi. It is 1/2 inch.
  • I would recommend fitting single pipe valves as greater flow is still needed.
  • As long as they are 1/2", then these would be suitable.
  • Yes, you will need RA2910 sensors to go with them. We stock Herz single pipe lockshields. HCO code 16B98. We don't stock any other single pipe valves. When you have made a decision, email sales@heatingcontrolsonline.co.uk and we will look at costs for you.
Showing 1 to 10 of 10 (1 pages)