Danfoss TPOne-RF Wireless Programmable Thermostat - With RX1S Receiver
TPOne Programmable Room Thermostat platform delivers new levels of user friendly interaction. The flexible dot matrix display uses easy read icons and text information to provide feedback on status and settings to the installer and user. When the display is activated the backlight illuminates and guides are given on the what buttons will adjust temperatures or navigate the setting menus.
Chrono Proportional, Load Compensation control is the default heat regulation system that will deliver increased comfort and improved economy over standard on/off control. Standard On/Off can also be selected.
When chrono-proportional mode is set, the thermostat introduces a fixed cycle rate on the system and then determines the duration of the On and Off periods within each cycle in proportion to load.
The control algorithm used to determine the on/off periods uses a proportional + integral (PI) routine to eliminate offset normally associated with on/off or simple proportional control.
Chrono-proportional control significantly improves comfort and generally improves boiler efficiency by optimising water temperature.
For TPOne we have redesigned the heating startup options. Standard startup is default giving instant heat at the scheduled time. New dynamic Delayed and Optimised start features are also selectable. Delayed start will pause the heating startup at the scheduled time dependant on the difference between ambient and required temperature which will decrease energy usage. Optimised start will monitor the difference between ambient and required temperature and will calculate the best time to start heating to hit setpoint at the scheduled time.
Both features dynamically adjust according to performance accuracy each day to ensure most acurate control and remove the need for manual setting and adjustment.
Additional TPOne features include:
- Seperate User & Installer Setting Menus
- Holiday Scheduler
- Upper and Lower Temperature Limits
- Capacitive Touch Button Control
- Push Button Lock
- °C or °F Selectable Display
- Audible Button Click (selectable)
- Frost Protect Temperature Setting
- Clear Text Display (7 Languages)
- Boiler Service Timer
Switch Rating: 3A at 230Vac
Setting temperature range: 5-35 °C
Dimensions (mm): H66 x W155 x D30
Battery Life: Min 2 years
Ask a Question about Danfoss TPOne-RF Wireless Programmable Thermostat - With RX1S Receiver
-
It is normal AA batteries.
The wireless version is only available in single channel.
-
They all have their own channels, so there will be no interference.
-
If the sensor has failed, then the unit will need to be replaced.
-
It depends on whether it is the TPOne-B, TPOne-M or TPOne-RF you have. Please email us on sales@heatingcontrolsonline.co.uk
-
Yes, you can leave it on a constant low temperature to protect our property while you are away.
Wireless controls work poorly with thick walls. I would strongly recommend a wired thermostat instead.
-
The TPOne-RF does not control hot water. You would need a separate control for hot water.
-
Both are included. So this is all you need.
-
It depends on how it is wired in. Usually you need to set it to 24 hours.
-
Press the OK button for 5 seconds to unlock.
-
Unless you have a TP7001M, or the TP7001 has previously replaced a main thermostat, you will not have the mains power available to power the receiver. I would recommend fitting the receiver near the boiler (combi) or airing cupboard instead. Wireless range varies depending on construction of walls and other factors. However one wall (unless thick stone) should not be a problem for it.
-
You can programme up to 6 per day.