Image is for illustration only and should not be relied upon Honeywell T6360 Replacement Dial
Honeywell T6360 Replacement Dial

Honeywell T6360 Replacement Dial

0 reviews
£9.56
Ex VAT: £7.97
Brand:
HCO Code: 08A09
Availability:  In Stock

Replacement Dial for Honeywell T4360B T4360C T4360D T6360A T6360B and T6360C room thermostats

If your dial is prone to cracking it is recommended that the thermostat is replaced with the Danfoss Randall RMT230

Model: R42006961-001 (42006616-001)

 

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • You need to turn it until it clicks.  Then push the dial on with the current temperature pointing up.
  • I'm afraid not.

  • Yes it will.

  • Hi.  T40 is not the model number.  If it looks the same, then it will be suitable.

  • Loosen the screw on the bottom and hinge the cover up. Pull the old dial off, push the new one on. Refit the cover.
  • Please send us some photos and we will check.
  • Hi. It is a Honeywell part.
  • If it looks the same. Then it will be suitable. It doesn't come with instructions. You just push it on.
  • Hi. Yes it is.
  • Hi. It will click at the current room temperature. You will need a thermometer to determine that and press it on at correct setting.
  • Please email us a photo to sales@heatingcontrolsonline.co.uk
  • Hi. Yes, this would be suitable for that one.
  • Yes it will.
  • I'm afraid T40 is not the model number of the thermostat.
  • Turn the underneath knob until it clicks. Then push on the dial with the current temperature at the very top.
Showing 1 to 15 of 16 (2 pages)
Expand All
  • You need to turn it until it clicks.  Then push the dial on with the current temperature pointing up.
  • I'm afraid not.

  • Yes it will.

  • Hi.  T40 is not the model number.  If it looks the same, then it will be suitable.

  • Loosen the screw on the bottom and hinge the cover up. Pull the old dial off, push the new one on. Refit the cover.
  • Please send us some photos and we will check.
  • Hi. It is a Honeywell part.
  • If it looks the same. Then it will be suitable. It doesn't come with instructions. You just push it on.
  • Hi. Yes it is.
  • Hi. It will click at the current room temperature. You will need a thermometer to determine that and press it on at correct setting.
  • Please email us a photo to sales@heatingcontrolsonline.co.uk
  • Hi. Yes, this would be suitable for that one.
  • Yes it will.
  • I'm afraid T40 is not the model number of the thermostat.
  • Turn the underneath knob until it clicks. Then push on the dial with the current temperature at the very top.
Showing 1 to 15 of 16 (2 pages)