Image is for illustration only and should not be relied upon Horstmann HRFS1 (RFT1) (T50) Wireless Programmamable Thermostat
Horstmann HRFS1 (RFT1) (T50) Wireless Programmamable Thermostat

Horstmann HRFS1 (RFT1) (T50) Wireless Programmamable Thermostat

0 reviews
£41.99
Ex VAT: £34.99
Brand:
HCO Code: 21B12
Availability:  In Stock

Control Centre: - Can be placed anywhere in the home to detect and control the temperature of an area of the user’s choice. Not limited by power control wiring locations.

  • Link with the Receiver via R F. Control distance 60M open site
  • LCD shows the "need to know" information only, which is easier to understand.
  • Real time clock with day of the week display
  • Room temperature display
  • Programme set-point display - Simplified temperature adjustment - Simplified programming procedure
  • Default factory preset programme from start up or reset
  • 5-2 or 7 day programming
  • Frost Protection pre set at 5˚C
  • Temporary override set-temperature
  • User selectable temperature span
  • User selectable heater/cooler operation mode
  • Battery level detection
  • 2 AA size alkaline batterie s
  • Slim housing design
  • EL backlight

    Receiver: - Linked with Control Centre via RF .

  • Power control rating 230V AC up to 16A resistive .
  • Powered by line voltage only. No battery required.
  • Two L E D indicators for power and output status.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Expand All
  • The codes on the transmitter and receiver must match.  If communication failures try different codes.  You can download the manual to explain the process in the downloads tab.

  • For the summer months, you can just press the snowflake symbol to put the thermostat into frost protect.  For full off (not recommended as it can leave your system vulnerable to frost) there is a switch under the receiver cover.

  • Unfortunately not, it requires at least 3 wires (live, neutral, return).
  • No, it is the small recessed button under the snowflake button.  You will need a pin to press it.

  • Hi.  Yes it would.

  • Please see page 16 of the manual.  The manual can be downloaded under the downloads tab.

  • The receiver need to be compatible with the thermostat.  If you have a HRFS1 receiver, then you can only use a HRFS1 thermostat.

  • Hi.  It does sound like it needs to be replaced.

  • Yes it does.

  • Hi.  You will need to change the receiver as well.

  • DIP Switch number 4 should be in the down position.  You will need to press reset after making the change.

  • You can press the frost button to put it into frost mode.  It will only then come on if there is a risk of the pipes freezing.

    There isn't a mode for permanently on
  • No. You would need to change the receiver as well.
  • Under the downloads tab.
  • It is likely the programmer has been overridden to avoid it clashing with the programmable thermostat. Programming must be done on the thermostat.
Showing 1 to 15 of 84 (6 pages)