Image is for illustration only and should not be relied upon Siemens CMV322 Mid-Position Motorised Valve

Siemens CMV322 Mid-Position Motorised Valve

Siemens CMV322 Mid-Position Motorised Valve

0 reviews

£117.07

Ex VAT: £97.56

Brand: Siemens (Landis & Staefa/Gyr)

HCO Code: 07E01

Availability: In Stock

* Removable replaceable head.
* 3 Port 22mm Mid-Position
* Replaceable Motor
* Wedge Type Actuator
* Spring Return Operation
* Manual Lever for Flushing or Filling the System

Direct Swap (Same wiring dimensions and thread) for:
Landis & Gyr / Landis & Staefa / Siemens MAV-322 MA-V322C 3PMP-V22
Boss Therm B3P22 BMPV22
Tower MP3-22C

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Hi,
Does your CMV322 3-Port Valve come complete with nuts, olives and cable, please? Answers1

Hi
Yes it does.

Hi I bought one of these a couple years ago of your good selves: The synchronous motor has gone noisey. It says in the details 'replaceable motor' but doesn't give a part number? Can you advise suitable replacement motor?

TIA
Ed Answers1

Hi. 14C04 would be suitable.

I have a siemens 3pmp-v22 what has worn the gear teeth on the half moon part does a Siemens cmv322 have the same insides as the 3pmp-v22 Answers1

Yes it does.

Need to replace Landis & Staefe Marked MAV322 B6C 397892 System PSI300 Watt 6.5. Think yours would be suitable replacement but not sure if valve is 22mm. Is there a clue in part numbers. Thanks. Answers1

Yes, the 22 at the end of the model numbers signify 22mm.

hi I have just received a siemens cmv 322 motorised valve ( excellent service ) as a direct swap for my landis staefa mav -322 but if port b goes to hot water and b to central heating the lever will be on top of the valve not the bottom as now is this ok Thankyou Answers1

Hi. Yes that is fine.

I need to replace Siemens landis and staefa rmh but can’t find one anywhere, is there another unit that is like for like that will do the same job as a direct replacement? Answers1

I'm afraid not. A complete valve change is needed.

I need to replace a landis gyr DA V322 valve and motor. Is the CMV322 a replacement for this. Answers1

Yes it is.

Hi, can you supply a replacement actuator for my Landis & Staefa MAV-322 3 port motorised valve, or would I have to fit a complete unit. If so which would be a direct replacement to suit existing pipework. Thanks Answers1

I'm afraid not. You will need to replace the whole valve. The CMV322 is the one you need.

Just ordered a CMV 322 ( from yourselves) to replace a LANDIS & GYR MAV 322 , is the wiring the same please , my valve has 5 wires.. ? Answers1

Yes it is.

I have a MA V322 landis valve, which i can't get a new actuator for but will nuts and pipes with the olives go in to cmv 322 assuming i can spring the pipes a little without cutting it all out and a repiping it? failing that information on rebuilding the old actuator. Thanks Answers1

Yes, the dimensions and thread are the same, so it would be a straight swap using the existing compression nuts.

IS THE WIRING THE SAME AS A MA-V322C?. Answers1

Yes it is.

I have a Landis &Gyr 3 port valve MAV322 is there a replacement actuator available? Also if the paddle indicator shows paddle at A does this signify all flow is through B? Answers1

I'm afraid you cannot get a replacement actuator for the MAV322. Yes that's correct.

I have a Siemens 3 PMP-V22 valve in my heating systum . Just to confirm a CMV 322 Valve is the modern replacement . Answers1

Yes it is.

It says please remove actuator before installation? How do I do this? Answers1

You move the lever into the manual position and then just pull it off the valve.

Will this head fit the Mav-322 and if so does it need draining to fit? Answers1

You will need to replace the whole valve with the CMV322, this would require a drain to below the point of the motorised valve.

Showing 1 to 15 of 34 (3 pages)

1
2
3
>
>|

Hi,
Does your CMV322 3-Port Valve come complete with nuts, olives and cable, please? Answers1

Hi
Yes it does.

Hi I bought one of these a couple years ago of your good selves: The synchronous motor has gone noisey. It says in the details 'replaceable motor' but doesn't give a part number? Can you advise suitable replacement motor?

TIA
Ed Answers1

Hi. 14C04 would be suitable.

I have a siemens 3pmp-v22 what has worn the gear teeth on the half moon part does a Siemens cmv322 have the same insides as the 3pmp-v22 Answers1

Yes it does.

Need to replace Landis & Staefe Marked MAV322 B6C 397892 System PSI300 Watt 6.5. Think yours would be suitable replacement but not sure if valve is 22mm. Is there a clue in part numbers. Thanks. Answers1

Yes, the 22 at the end of the model numbers signify 22mm.

hi I have just received a siemens cmv 322 motorised valve ( excellent service ) as a direct swap for my landis staefa mav -322 but if port b goes to hot water and b to central heating the lever will be on top of the valve not the bottom as now is this ok Thankyou Answers1

Hi. Yes that is fine.

I need to replace Siemens landis and staefa rmh but can’t find one anywhere, is there another unit that is like for like that will do the same job as a direct replacement? Answers1

I'm afraid not. A complete valve change is needed.

I need to replace a landis gyr DA V322 valve and motor. Is the CMV322 a replacement for this. Answers1

Yes it is.

Hi, can you supply a replacement actuator for my Landis & Staefa MAV-322 3 port motorised valve, or would I have to fit a complete unit. If so which would be a direct replacement to suit existing pipework. Thanks Answers1

I'm afraid not. You will need to replace the whole valve. The CMV322 is the one you need.

Just ordered a CMV 322 ( from yourselves) to replace a LANDIS & GYR MAV 322 , is the wiring the same please , my valve has 5 wires.. ? Answers1

Yes it is.

I have a MA V322 landis valve, which i can't get a new actuator for but will nuts and pipes with the olives go in to cmv 322 assuming i can spring the pipes a little without cutting it all out and a repiping it? failing that information on rebuilding the old actuator. Thanks Answers1

Yes, the dimensions and thread are the same, so it would be a straight swap using the existing compression nuts.

IS THE WIRING THE SAME AS A MA-V322C?. Answers1

Yes it is.

I have a Landis &Gyr 3 port valve MAV322 is there a replacement actuator available? Also if the paddle indicator shows paddle at A does this signify all flow is through B? Answers1

I'm afraid you cannot get a replacement actuator for the MAV322. Yes that's correct.

I have a Siemens 3 PMP-V22 valve in my heating systum . Just to confirm a CMV 322 Valve is the modern replacement . Answers1

Yes it is.

It says please remove actuator before installation? How do I do this? Answers1

You move the lever into the manual position and then just pull it off the valve.

Will this head fit the Mav-322 and if so does it need draining to fit? Answers1

You will need to replace the whole valve with the CMV322, this would require a drain to below the point of the motorised valve.

Showing 1 to 15 of 34 (3 pages)

1
2
3
>
>|