Image is for illustration only and should not be relied upon Siemens REV24-RF 7-Day Wireless Programmable Thermostat

Siemens REV24-RF 7-Day Wireless Programmable Thermostat

Siemens REV24-RF 7-Day Wireless Programmable Thermostat

0 reviews

£148.01

Ex VAT: £123.34

Brand: Siemens (Landis & Staefa/Gyr)

HCO Code: 06C07

Availability: In Stock

Replaces obsolete REV23-RF

The new REV24RF digital room thermostat from Siemens are designed for straightforward operation and a high level of reliability. Improved design ensures that the new products are even more user-friendly and - thanks to very accurate room temperature control - offer enhanced comfort while providing even greater energy efficiency. The new thermostats from Siemens are suited for any type of heating application and excel in a very good price-performance ratio.

User-friendly features include:
* Program selection slider
* Extremely bright high-contrast backlit display
* Bi-directional commumication with receiver
* 7-Day programming
* Over-ride functions
* Holiday mode
* Party mode
* Frost and overheating protetion
* Information level for checking settings
* Sensor calibration
* Can be used for heating or cooling
* Pump/valve protection
* Optimum Start
* Manual over-ride button on receiver
* Automatic Summer/Winter time change
* Thermostat can be wall mounted or used with supplied table stand
* Supplied complete with receiver
* 16(2)A SPDT Volt-Free contacts

Dimensions:
Transmitter: 94x135x30mm HxWxD
Receiver: 88x114x32mm HxWxD

Model: REV24RF/SET

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

How many heating on / heating off periods can be set for a 24 hour period? Answers1

You can have up to 3 comfort periods per day.

Already have the Rev23.03rf is it straight replacement or will I have to change the receiver also Answers1

You will need to change the receiver, but it will connect to the same 4 wires.

Is this compatible with Worcester 28CDi RSF combi boiler? Answers1

Yes it is.

Hi, i have a Potterton combi boiler. currently using a siemens RDJ10RF control unit. However it doesnt have a 7 day timer facility. Would this one work?? Or is there better unit available? regards Lee Answers1

Hi. Yes it would. It will connect to the same 4 wires as the RDJ10-RF.

Will this work with a Remeha Avanta 28C boiler and replace the useless Salus RT500 controller? Answers1

Assuming you have the RT500-RF, then yes the receiver will connect to the same 4 wires as the Salus receiver.

I have baxi back oiler, wickes programmer and satchwell thermostat, will this work with the back boiler and replace the programmer and thermostat? Answers1

This will not control hot water, so if your hot water is timed you will need to retain the programmer for that.

Hello I am just wanting to replace my old REV24 as the switch is damaged, do i also have to renew the receiver also or will a new one work with an existing receiever? many thanks for your help Answers1

No you can bind it into work with your existing receiver.

I have a Honeywell CM927 that has lost its display. Can the above take its place, most of the info on line about the honeywells display are not good. Many fail I think it's an inherent problem, if this was on a mobile phone they would have to put them right. Thanks Roger Answers1

Yes, the Siemens receiver will connect to the same 4 wires as the Honeywell receiver.

We want the heating to come on at two particular times in each 24 hours which is fine, but not to come on for half the night when it is cold - however if we put the temperature down lower to avoid this then of course it won't come on at 5 am to warm the house before we get up! Is it possible to set two different temperatures to avoid this happening, or just to have it on frost protection while we are at work or asleep to save fuel? Thank you Answers1

I would recommend enabling the optimum start via the DIP switched. The manual for more information.

Our REV24RF control panel is completely blank. I have tested the batteries and they are apparently still good and have also tried replacing them but still nothing happens. Is there any hidden power button that I need to press or does this just mean the unit is broken? Answers1

The is a reset button under the DIP switch panel on the back of the unit. If that doesn't work, then a new unit will be needed.

Will this be able to replace my broken REV23rf, working with the existing REV-R.02/1? Answers1

You will need to replace the receiver, but it will connect to the same 4 wires.

I currently have rev24rf controller and receiver controller display has almost unreadable, which other wireless controller will be compatible with the receiver I already have can’t afford the rev24rf one Thanks Answers1

Unfortunately the REV24-RF is the only one that can talk to that receiver.

Hi I have Siemens rev24 heating thermostat and receiver I broke my wireless controller I’ve bought a new one how do i bind it to the existing receiver as there is no learn button on the back of the new one like there is on the old one I’ve set up the new one but it doesn’t seem to be linked to the Receiver Thanks for your help Answers1

Check it is the wireless REV24-RF model, not the wired one.

I have this set installed at home but have broken the wireless room stat part, if i buy the set again can i just pair the new wireless room stat unit to my existing receiver unit that is already installed? Thank you. Answers1

Yes, you can.

I have a REV23RF controller that is not working well, can I switch to the REV24 and if so how do I do that I am not very techie Answers1

Yes, the new receiver will connect to the same 4 wires as your existing receiver.

Showing 1 to 15 of 71 (5 pages)

1
2
3
4
5
>
>|

How many heating on / heating off periods can be set for a 24 hour period? Answers1

You can have up to 3 comfort periods per day.

Already have the Rev23.03rf is it straight replacement or will I have to change the receiver also Answers1

You will need to change the receiver, but it will connect to the same 4 wires.

Is this compatible with Worcester 28CDi RSF combi boiler? Answers1

Yes it is.

Hi, i have a Potterton combi boiler. currently using a siemens RDJ10RF control unit. However it doesnt have a 7 day timer facility. Would this one work?? Or is there better unit available? regards Lee Answers1

Hi. Yes it would. It will connect to the same 4 wires as the RDJ10-RF.

Will this work with a Remeha Avanta 28C boiler and replace the useless Salus RT500 controller? Answers1

Assuming you have the RT500-RF, then yes the receiver will connect to the same 4 wires as the Salus receiver.

I have baxi back oiler, wickes programmer and satchwell thermostat, will this work with the back boiler and replace the programmer and thermostat? Answers1

This will not control hot water, so if your hot water is timed you will need to retain the programmer for that.

Hello I am just wanting to replace my old REV24 as the switch is damaged, do i also have to renew the receiver also or will a new one work with an existing receiever? many thanks for your help Answers1

No you can bind it into work with your existing receiver.

I have a Honeywell CM927 that has lost its display. Can the above take its place, most of the info on line about the honeywells display are not good. Many fail I think it's an inherent problem, if this was on a mobile phone they would have to put them right. Thanks Roger Answers1

Yes, the Siemens receiver will connect to the same 4 wires as the Honeywell receiver.

We want the heating to come on at two particular times in each 24 hours which is fine, but not to come on for half the night when it is cold - however if we put the temperature down lower to avoid this then of course it won't come on at 5 am to warm the house before we get up! Is it possible to set two different temperatures to avoid this happening, or just to have it on frost protection while we are at work or asleep to save fuel? Thank you Answers1

I would recommend enabling the optimum start via the DIP switched. The manual for more information.

Our REV24RF control panel is completely blank. I have tested the batteries and they are apparently still good and have also tried replacing them but still nothing happens. Is there any hidden power button that I need to press or does this just mean the unit is broken? Answers1

The is a reset button under the DIP switch panel on the back of the unit. If that doesn't work, then a new unit will be needed.

Will this be able to replace my broken REV23rf, working with the existing REV-R.02/1? Answers1

You will need to replace the receiver, but it will connect to the same 4 wires.

I currently have rev24rf controller and receiver controller display has almost unreadable, which other wireless controller will be compatible with the receiver I already have can’t afford the rev24rf one Thanks Answers1

Unfortunately the REV24-RF is the only one that can talk to that receiver.

Hi I have Siemens rev24 heating thermostat and receiver I broke my wireless controller I’ve bought a new one how do i bind it to the existing receiver as there is no learn button on the back of the new one like there is on the old one I’ve set up the new one but it doesn’t seem to be linked to the Receiver Thanks for your help Answers1

Check it is the wireless REV24-RF model, not the wired one.

I have this set installed at home but have broken the wireless room stat part, if i buy the set again can i just pair the new wireless room stat unit to my existing receiver unit that is already installed? Thank you. Answers1

Yes, you can.

I have a REV23RF controller that is not working well, can I switch to the REV24 and if so how do I do that I am not very techie Answers1

Yes, the new receiver will connect to the same 4 wires as your existing receiver.

Showing 1 to 15 of 71 (5 pages)

1
2
3
4
5
>
>|