Thermostatic mixing valve for manifiold. Also sold under Polypipe brand. 30-60C..

Obsolete - Use 20A12 as complete set replacement.* Size: 1" (1.5" to pump) * Range of regulation: 25°C - 55 °C (Nominal conditions: TH = 65 °C; TC = 15 °C) * Kv = 1.8 - 3.3 * Maximum operating..

Replacement mixing valve module for older TM3 set.1" Male threads to flow/returnPlease note if you threads are 1" female, them you need the TM3-R instead...

For replacement use BU692..

* High flow rates - suitable for systems up to 200 sqm. * Superb temperature control. * Quick reaction to supply temperature changes. * User adjustable between 35°C and 65°C. * Compression type co..

For use with Mutli-Fit Thermal Actuator or Heimeier Thermostatic Head (see related tab). Kvs value 2.5  ..

Replacement Thermostatic Head for Underfloor Heating 15-50C Replaces older black model:  ..

2-port control valve, for use with FTC, FEV, FEK or FED controller. 3/4" Eurocone fittings...

Fixed setpoint self-contained actuator for fitting on mixing valves. Connect one sensor to the flow from boiler, the other sensor to the mixed output pipe.Simple setup directly on the actuator. ..

This device is an over-temperature thermostat suitable for the control of the supply water temperature for a underfloor heating manifold.  Switching off the secondary circulating pump when the fl..

Thermostatic head with immersion probe for thermostatic regulation group Setting: 20-70°C Capillary Length 2000mm Size thread connection: M30x1,5 Size Probe: 11x111mm WxL Suitable repla..

Replacement mixing module used with the thermostatic head on the TM3-R Mixer.1" Female threads to Flow/ReturnPlease note if you have male threads to flow/return, then you need the TM3 instead...